public class TorqueCurrentFOC : ControlRequesttype TorqueCurrentFOC =
class
inherit ControlRequest
end| TorqueCurrentFOC | This feature requires Phoenix Pro. Request a specified motor current (field oriented control). This control request will drive the motor to the requested motor (stator) current value. This leverages field oriented control (FOC), which means greater peak power than what is documented. This scales to torque based on Motor's kT constant. Output Amount of motor current in Amperes MaxAbsDutyCycle The maximum absolute motor output that can be applied, which effectively limits the velocity. For example, 0.50 means no more than 50% output in either direction. This is useful for preventing the motor from spinning to its terminal velocity when there is no external torque applied unto the rotor. Note this is absolute maximum, so the value should be between zero and one. Deadband Deadband in Amperes. If torque request is within deadband, the bridge output is neutral. If deadband is set to zero then there is effectively no deadband. Note if deadband is zero, a free spinning motor will spin for quite a while as the firmware attempts to hold the motor's bemf. If user expects motor to cease spinning quickly with a demand of zero, we recommend a deadband of one Ampere. This value will be converted to an integral value of amps. OverrideCoastDurNeutral Set to true to coast the rotor when output is zero (or within deadband). Set to false to use the NeutralMode configuration setting (default). This flag exists to provide the fundamental behavior of this control when output is zero, which is to provide 0A (zero torque). |
| ConfigTimeout | The timeout when sending configs associated with this control |
| ControlInfo |
Plain old data container holding name-value pairs of the control request parameters
(Inherited from ControlRequest) |
| Deadband | Deadband in Amperes. If torque request is within deadband, the bridge output is neutral. If deadband is set to zero then there is effectively no deadband. Note if deadband is zero, a free spinning motor will spin for quite a while as the firmware attempts to hold the motor's bemf. If user expects motor to cease spinning quickly with a demand of zero, we recommend a deadband of one Ampere. This value will be converted to an integral value of amps. |
| MaxAbsDutyCycle | The maximum absolute motor output that can be applied, which effectively limits the velocity. For example, 0.50 means no more than 50% output in either direction. This is useful for preventing the motor from spinning to its terminal velocity when there is no external torque applied unto the rotor. Note this is absolute maximum, so the value should be between zero and one. |
| Output | Amount of motor current in Amperes |
| OverrideCoastDurNeutral | Set to true to coast the rotor when output is zero (or within deadband). Set to false to use the NeutralMode configuration setting (default). This flag exists to provide the fundamental behavior of this control when output is zero, which is to provide 0A (zero torque). |
| UpdateFreqHz | The period at which this control will update at. This is designated in Hertz, with a minimum of 20 Hz (every 50 ms) and a maximum of 1000 Hz (every 1 ms). If this field is set to 0 Hz, the control request will be sent immediately as a one-shot frame. This may be useful for advanced applications that require outputs to be synchronized with data acquisition. In this case, we recommend not exceeding 50 ms between control calls. |
| Equals | Determines whether the specified object is equal to the current object. (Inherited from Object) |
| Finalize | Allows an object to try to free resources and perform other cleanup operations before it is reclaimed by garbage collection. (Inherited from Object) |
| ForceApplyConfigs | Forces configs to be applied the next time this is used in a setControl. This is not necessary in the majority of cases, because Phoenix will make sure configs are properly set when they are not already set |
| GetHashCode | Serves as the default hash function. (Inherited from Object) |
| GetType | Gets the Type of the current instance. (Inherited from Object) |
| MemberwiseClone | Creates a shallow copy of the current Object. (Inherited from Object) |
| SendRequest |
Sends this request out over CAN bus to the device
for the device to apply.
(Overrides ControlRequestSendRequest(String, UInt32, Boolean)) |
| ToString |
Provides the string representation of this object
(Overrides ObjectToString) |
| WithUpdateFreqHz | Sets the period at which this control will update at. This is designated in Hertz, with a minimum of 20 Hz (every 50 ms) and a maximum of 1000 Hz (every 1 ms). If this field is set to 0 Hz, the control request will be sent immediately as a one-shot frame. This may be useful for advanced applications that require outputs to be synchronized with data acquisition. In this case, we recommend not exceeding 50 ms between control calls. |