| ▼Nctre | |
| ▼Nphoenix | |
| ►Nplatform | |
| ►Ncan | |
| Ccanframe_t | "plain old data" container for holding a CAN Frame Event |
| ►Nthreading | |
| CCopyMoveMutex | An extension of mutex that defines empty copy and move constructors and assignment operators |
| CManualEvent | Manual Event object, useful for signaling other threads about an event |
| CRcManualEvent | Reference-counted Manual Event |
| ▼Nphoenix6 | |
| ►Nconfigs | |
| CAudioConfigs | Configs that directly affect motor-output |
| CCANcoderConfiguration | Class for CANcoder, a CAN based magnetic encoder that provides absolute and relative position along with filtered velocity |
| CCANcoderConfigurator | Class for CANcoder, a CAN based magnetic encoder that provides absolute and relative position along with filtered velocity |
| CClosedLoopGeneralConfigs | Configs that affect general behavior during closed-looping |
| CClosedLoopRampsConfigs | Configs that directly affect motor-output |
| CCurrentLimitsConfigs | Configs that directly affect current limiting features |
| CCustomParamsConfigs | Configs that directly affect motor-output |
| CFeedbackConfigs | Configs that directly affect motor-output |
| CGyroTrimConfigs | Configs to trim the Pigeon2's gyroscope |
| CHardwareLimitSwitchConfigs | Configs that directly affect motor-output |
| CMagnetSensorConfigs | Configs that affect the magnet sensor and how to interpret it |
| CMotionMagicConfigs | Configs that directly affect motor-output |
| CMotorOutputConfigs | Configs that directly affect motor-output |
| CMountPoseConfigs | Configs for Pigeon 2's Mount Pose configuration |
| COpenLoopRampsConfigs | Configs that directly affect motor-output |
| CParentConfiguration | |
| CParentConfigurator | |
| CPigeon2Configuration | Class description for the Pigeon 2 IMU sensor that measures orientation |
| CPigeon2Configurator | Class description for the Pigeon 2 IMU sensor that measures orientation |
| CPigeon2FeaturesConfigs | Configs to enable/disable various features of the Pigeon2 |
| CSlot0Configs | What the gains for slot 0 are |
| CSlot1Configs | What the gains for slot 1 are |
| CSlot2Configs | What the gains for slot 2 are |
| CSoftwareLimitSwitchConfigs | Configs that directly affect motor-output |
| CTalonFXConfiguration | Class description for the Talon FX integrated motor controller that runs on associated Falcon motors |
| CTalonFXConfigurator | Class description for the Talon FX integrated motor controller that runs on associated Falcon motors |
| CTorqueCurrentConfigs | Configs that directly affect motor-output |
| CVoltageConfigs | Voltage-specific configs |
| ►Ncontrols | |
| CCoastOut | Request coast neutral output of actuator |
| CControlInfo | Information about a control request |
| CControlRequest | Abstract Control Request class that other control requests extend for use |
| CDutyCycleOut | Request a specified motor duty cycle |
| CEmptyControl | Generic Empty Control class used to do nothing |
| CFollower | Follow the motor output of another Talon |
| CMotionMagicDutyCycle | Requests Motion Magic® to target a final position using a motion profile |
| CMotionMagicTorqueCurrentFOC | This feature requires Phoenix Pro |
| CMotionMagicVoltage | Requests Motion Magic® to target a final position using a motion profile |
| CNeutralOut | Request neutral output of actuator |
| CPositionDutyCycle | Request PID to target position with duty cycle feedforward |
| CPositionTorqueCurrentFOC | This feature requires Phoenix Pro |
| CPositionVoltage | Request PID to target position with voltage feedforward |
| CStaticBrake | Applies full neutral-brake by shorting motor leads together |
| CStrictFollower | Follow the motor output of another Talon while ignoring the master's invert setting |
| CTorqueCurrentFOC | This feature requires Phoenix Pro |
| CVelocityDutyCycle | Request PID to target velocity with duty cycle feedforward |
| CVelocityTorqueCurrentFOC | This feature requires Phoenix Pro |
| CVelocityVoltage | Request PID to target velocity with voltage feedforward |
| CVoltageOut | Request a specified voltage |
| ►Nhardware | |
| ►Ncore | |
| CCoreCANcoder | Class for CANcoder, a CAN based magnetic encoder that provides absolute and relative position along with filtered velocity |
| CCorePigeon2 | Class description for the Pigeon 2 IMU sensor that measures orientation |
| CCoreTalonFX | Class description for the Talon FX integrated motor controller that runs on associated Falcon motors |
| CCANcoder | Class for CANcoder, a CAN based magnetic encoder that provides absolute and relative position along with filtered velocity |
| CDeviceIdentifier | |
| CParentDevice | Parent class for all devices |
| CPigeon2 | Class description for the Pigeon 2 IMU sensor that measures orientation |
| CTalonFX | Class description for the Talon FX integrated motor controller that runs on associated Falcon motors |
| ►Nnetworking | |
| CWrappers | |
| ►Nsignals | |
| CAbsoluteSensorRangeValue | The range of the absolute sensor, either [0, 1) or [-0.5, 0.5) |
| CAppliedRotorPolarityValue | The applied rotor polarity |
| CBridgeOuputValue | The applied output of the bridge |
| CControlModeValue | The active control mode of the motor controller |
| CDeviceEnableValue | True if the device is enabled |
| CFeedbackSensorSourceValue | Choose what sensor source is reported via API and used by closed-loop and limit features |
| CForwardLimitSourceValue | Determines where to poll the forward limit switch |
| CForwardLimitTypeValue | Determines if limit is normally-open (default) or normally-closed |
| CForwardLimitValue | Forward Limit Pin |
| CFrcLockValue | True if device is locked by FRC |
| CInvertedValue | Invert state of the device |
| CIsPROLicensedValue | Whether the device is pro licensed or not |
| CLed1OffColorValue | The Color of LED1 when it's "Off" |
| CLed1OnColorValue | The Color of LED1 when it's "On" |
| CLed2OffColorValue | The Color of LED2 when it's "Off" |
| CLed2OnColorValue | The Color of LED2 when it's "On" |
| CMagnetHealthValue | Magnet health as measured by CANcoder |
| CMotionMagicIsRunningValue | Check if Motion Magic® is running |
| CNeutralModeValue | The state of the motor controller bridge when output is neutral or disabled |
| CReverseLimitSourceValue | Determines where to poll the reverse limit switch |
| CReverseLimitTypeValue | Determines if limit is normally-open (default) or normally-closed |
| CReverseLimitValue | Reverse Limit Pin |
| CRobotEnableValue | True if the robot is enabled |
| CSensorDirectionValue | Direction of the sensor to determine positive facing the LED side of the CANcoder |
| CSystem_StateValue | System state of the device |
| ►Nsim | |
| CCANcoderSimState | Class to control the state of a simulated hardware::CANcoder |
| CPigeon2SimState | Class to control the state of a simulated hardware::Pigeon2 |
| CTalonFXSimState | Class to control the state of a simulated hardware::TalonFX |
| ►Nspns | |
| CSpnValue | Class that holds all the SPN values used in Phoenix Pro devices |
| ►Nwpiutils | |
| CAutoFeedEnable | |
| CCallbackHelper | |
| CAllTimestamps | A collection of timestamps for a received signal |
| CBaseStatusSignal | Class that provides operations to retrieve information about a status signal |
| CISerializable | |
| CSignalMeasurement | Information from a single measurement of a status signal |
| CStatusSignal | Represents a status signal with data of type T, and operations available to retrieve information about the signal |
| CTimestamp | Information about the timestamp of a signal |
1.9.4 
