Package com.ctre.phoenix6.configs

Class CANcoderConfigurator

java.lang.Object
com.ctre.phoenix6.configs.ParentConfigurator
com.ctre.phoenix6.configs.CANcoderConfigurator
public class CANcoderConfigurator
extends ParentConfigurator
Class for CANcoder, a CAN based magnetic encoder that provides absolute and relative position along with filtered velocity. This handles the configurations for the CANcoder

  • Constructor Details

  • Method Details

    • refresh

      public StatusCode refresh​(CANcoderConfiguration configs)
      Refreshes the values of the specified config group.

      This will wait up to ParentConfigurator.DefaultTimeoutSeconds.

      Call to refresh the selected configs from the device.

      Parameters:
      configs - The configs to refresh
      Returns:
      StatusCode of refreshing the configs

    • refresh

      public StatusCode refresh​(CANcoderConfiguration configs, double timeoutSeconds)
      Refreshes the values of the specified config group.

      Call to refresh the selected configs from the device.

      Parameters:
      configs - The configs to refresh
      timeoutSeconds - Maximum amount of time to wait when performing configuration
      Returns:
      StatusCode of refreshing the configs

    • apply

      public StatusCode apply​(CANcoderConfiguration configs)
      Applies the contents of the specified config to the device.

      This will wait up to ParentConfigurator.DefaultTimeoutSeconds.

      Call to apply the selected configs.

      Parameters:
      configs - Configs to apply against.
      Returns:
      StatusCode of the set command

    • apply

      public StatusCode apply​(CANcoderConfiguration configs, double timeoutSeconds)
      Applies the contents of the specified config to the device.

      Call to apply the selected configs.

      Parameters:
      configs - Configs to apply against.
      timeoutSeconds - Maximum amount of time to wait when performing configuration
      Returns:
      StatusCode of the set command

    • refresh

      public StatusCode refresh​(MagnetSensorConfigs configs)
      Refreshes the values of the specified config group.

      This will wait up to ParentConfigurator.DefaultTimeoutSeconds.

      Call to refresh the selected configs from the device.

      Parameters:
      configs - The configs to refresh
      Returns:
      StatusCode of refreshing the configs

    • refresh

      public StatusCode refresh​(MagnetSensorConfigs configs, double timeoutSeconds)
      Refreshes the values of the specified config group.

      Call to refresh the selected configs from the device.

      Parameters:
      configs - The configs to refresh
      timeoutSeconds - Maximum amount of time to wait when performing configuration
      Returns:
      StatusCode of refreshing the configs

    • apply

      public StatusCode apply​(MagnetSensorConfigs configs)
      Applies the contents of the specified config to the device.

      This will wait up to ParentConfigurator.DefaultTimeoutSeconds.

      Call to apply the selected configs.

      Parameters:
      configs - Configs to apply against.
      Returns:
      StatusCode of the set command

    • apply

      public StatusCode apply​(MagnetSensorConfigs configs, double timeoutSeconds)
      Applies the contents of the specified config to the device.

      Call to apply the selected configs.

      Parameters:
      configs - Configs to apply against.
      timeoutSeconds - Maximum amount of time to wait when performing configuration
      Returns:
      StatusCode of the set command

    • setPosition

      public StatusCode setPosition​(double newValue)
      Sets the current position of the device.

      This will wait up to ParentConfigurator.DefaultTimeoutSeconds.

      This is available in the configurator in case the user wants to initialize their device entirely without passing a device reference down to the code that performs the initialization. In this case, the user passes down the configurator object and performs all the initialization code on the object.

      Parameters:
      newValue - Value to set to. Units are in rotations.
      Returns:
      StatusCode of the set command

    • setPosition

      public StatusCode setPosition​(double newValue, double timeoutSeconds)
      Sets the current position of the device.

      This is available in the configurator in case the user wants to initialize their device entirely without passing a device reference down to the code that performs the initialization. In this case, the user passes down the configurator object and performs all the initialization code on the object.

      Parameters:
      newValue - Value to set to. Units are in rotations.
      timeoutSeconds - Maximum time to wait up to in seconds.
      Returns:
      StatusCode of the set command

    • clearStickyFaults

      public StatusCode clearStickyFaults()
      Clear the sticky faults in the device.

      This typically has no impact on the device functionality. Instead, it just clears telemetry faults that are accessible via API and Tuner Self-Test.

      This will wait up to ParentConfigurator.DefaultTimeoutSeconds.

      This is available in the configurator in case the user wants to initialize their device entirely without passing a device reference down to the code that performs the initialization. In this case, the user passes down the configurator object and performs all the initialization code on the object.

      Returns:
      StatusCode of the set command

    • clearStickyFaults

      public StatusCode clearStickyFaults​(double timeoutSeconds)
      Clear the sticky faults in the device.

      This typically has no impact on the device functionality. Instead, it just clears telemetry faults that are accessible via API and Tuner Self-Test.

      This is available in the configurator in case the user wants to initialize their device entirely without passing a device reference down to the code that performs the initialization. In this case, the user passes down the configurator object and performs all the initialization code on the object.

      Parameters:
      timeoutSeconds - Maximum time to wait up to in seconds.
      Returns:
      StatusCode of the set command

    • clearStickyFault_Hardware

      public StatusCode clearStickyFault_Hardware()
      Clear sticky fault: Hardware fault occurred

      This will wait up to ParentConfigurator.DefaultTimeoutSeconds.

      This is available in the configurator in case the user wants to initialize their device entirely without passing a device reference down to the code that performs the initialization. In this case, the user passes down the configurator object and performs all the initialization code on the object.

      Returns:
      StatusCode of the set command

    • clearStickyFault_Hardware

      public StatusCode clearStickyFault_Hardware​(double timeoutSeconds)
      Clear sticky fault: Hardware fault occurred

      This is available in the configurator in case the user wants to initialize their device entirely without passing a device reference down to the code that performs the initialization. In this case, the user passes down the configurator object and performs all the initialization code on the object.

      Parameters:
      timeoutSeconds - Maximum time to wait up to in seconds.
      Returns:
      StatusCode of the set command

    • clearStickyFault_Undervoltage

      public StatusCode clearStickyFault_Undervoltage()
      Clear sticky fault: Device supply voltage dropped to near brownout levels

      This will wait up to ParentConfigurator.DefaultTimeoutSeconds.

      This is available in the configurator in case the user wants to initialize their device entirely without passing a device reference down to the code that performs the initialization. In this case, the user passes down the configurator object and performs all the initialization code on the object.

      Returns:
      StatusCode of the set command

    • clearStickyFault_Undervoltage

      public StatusCode clearStickyFault_Undervoltage​(double timeoutSeconds)
      Clear sticky fault: Device supply voltage dropped to near brownout levels

      This is available in the configurator in case the user wants to initialize their device entirely without passing a device reference down to the code that performs the initialization. In this case, the user passes down the configurator object and performs all the initialization code on the object.

      Parameters:
      timeoutSeconds - Maximum time to wait up to in seconds.
      Returns:
      StatusCode of the set command

    • clearStickyFault_BootDuringEnable

      public StatusCode clearStickyFault_BootDuringEnable()
      Clear sticky fault: Device boot while detecting the enable signal

      This will wait up to ParentConfigurator.DefaultTimeoutSeconds.

      This is available in the configurator in case the user wants to initialize their device entirely without passing a device reference down to the code that performs the initialization. In this case, the user passes down the configurator object and performs all the initialization code on the object.

      Returns:
      StatusCode of the set command

    • clearStickyFault_BootDuringEnable

      public StatusCode clearStickyFault_BootDuringEnable​(double timeoutSeconds)
      Clear sticky fault: Device boot while detecting the enable signal

      This is available in the configurator in case the user wants to initialize their device entirely without passing a device reference down to the code that performs the initialization. In this case, the user passes down the configurator object and performs all the initialization code on the object.

      Parameters:
      timeoutSeconds - Maximum time to wait up to in seconds.
      Returns:
      StatusCode of the set command

    • clearStickyFault_BadMagnet

      public StatusCode clearStickyFault_BadMagnet()
      Clear sticky fault: The magnet distance is not correct or magnet is missing

      This will wait up to ParentConfigurator.DefaultTimeoutSeconds.

      This is available in the configurator in case the user wants to initialize their device entirely without passing a device reference down to the code that performs the initialization. In this case, the user passes down the configurator object and performs all the initialization code on the object.

      Returns:
      StatusCode of the set command

    • clearStickyFault_BadMagnet

      public StatusCode clearStickyFault_BadMagnet​(double timeoutSeconds)
      Clear sticky fault: The magnet distance is not correct or magnet is missing

      This is available in the configurator in case the user wants to initialize their device entirely without passing a device reference down to the code that performs the initialization. In this case, the user passes down the configurator object and performs all the initialization code on the object.

      Parameters:
      timeoutSeconds - Maximum time to wait up to in seconds.
      Returns:
      StatusCode of the set command