`phoenix6.sim.talon_fx_sim_state`¶

Module Contents¶

class phoenix6.sim.talon_fx_sim_state.TalonFXSimState(device: phoenix6.hardware.core.core_talon_fx.CoreTalonFX, orientation: phoenix6.sim.chassis_reference.ChassisReference = ChassisReference.CounterClockwise_Positive)¶

Creates an object to control the state of a simulated TalonFX.

Note the recommended method of accessing simulation features is to use TalonFX.sim_state.

Parameters:

device (CoreTalonFX) – Device to which this simulation state is attached
orientation (ChassisReference) – Orientation of the device relative to the robot chassis

property last_status_code: phoenix6.status_code.StatusCode¶

Gets the last status code generated by a simulation function.

Not all functions return a status code but can potentially report errors. This function can be used to retrieve those status codes.

Returns:: Last status code generated by a simulation function
Return type:: StatusCode

property motor_voltage: phoenix6.units.volt¶

Gets the simulated output voltage of the motor.

Returns:: Voltage applied to the motor in Volts
Return type:: volt

property torque_current: phoenix6.units.ampere¶

Gets the simulated output torque current of the motor.

Phoenix 6 simulation automatically calculates current.

Returns:: Torque current applied to the motor in Amperes
Return type:: ampere

property supply_current: phoenix6.units.ampere¶

Gets the simulated supply current of the TalonFX.

Phoenix 6 simulation automatically calculates current.

Returns:: Supply current of the TalonFX in Amperes
Return type:: ampere

orientation¶

The orientation of the TalonFX relative to the robot chassis.

This value should not be changed based on the TalonFX invert. Rather, this value should be changed when the mechanical linkage between the TalonFX and the robot changes.

set_supply_voltage(volts: phoenix6.units.volt) → phoenix6.status_code.StatusCode¶

Sets the simulated supply voltage of the TalonFX.

The minimum allowed supply voltage is 4 V - values below this will be promoted to 4 V.

Parameters:: volts (volt) – The supply voltage in Volts
Returns:: Status code
Return type:: StatusCode

set_forward_limit(closed: bool) → phoenix6.status_code.StatusCode¶

Sets the simulated forward limit switch of the TalonFX.

Parameters:: closed (bool) – Whether the limit switch is closed
Returns:: Status code
Return type:: StatusCode

set_reverse_limit(closed: bool) → phoenix6.status_code.StatusCode¶

Sets the simulated reverse limit switch of the TalonFX.

Parameters:: closed (bool) – Whether the limit switch is closed
Returns:: Status code
Return type:: StatusCode

set_raw_rotor_position(rotations: phoenix6.units.rotation) → phoenix6.status_code.StatusCode¶

Sets the simulated raw rotor position of the TalonFX. This is the position of the rotor (before gear ratio) used for the RotorSensor feedback source.

Inputs to this function over time should be continuous, as user calls of TalonFX.set_position will be accounted for in the callee.

The TalonFX integrates this to calculate the true reported rotor position.

When using the WPI Sim GUI, you will notice a readonly position and settable rawPositionInput. The readonly signal is the emulated position which will match self-test in Tuner and the hardware API. Changes to rawPositionInput will be integrated into the emulated position. This way a simulator can modify the position without overriding hardware API calls for home-ing the sensor.

Parameters:: rotations (rotation) – The raw position in rotations
Returns:: Status code
Return type:: StatusCode

add_rotor_position(drotations: phoenix6.units.rotation) → phoenix6.status_code.StatusCode¶

Adds to the simulated rotor position of the TalonFX. This adds to the position of the rotor (before gear ratio) used for the RotorSensor feedback source.

Parameters:: drotations (rotation) – The change in position in rotations
Returns:: Status code
Return type:: StatusCode

set_rotor_velocity(rps: phoenix6.units.rotations_per_second) → phoenix6.status_code.StatusCode¶

Sets the simulated rotor velocity of the TalonFX. This is the velocity of the rotor (before gear ratio) used for the RotorSensor feedback source.

Parameters:: rps (rotations_per_second) – The new velocity in rotations per second
Returns:: Status code
Return type:: StatusCode

set_rotor_acceleration(rpss: phoenix6.units.rotations_per_second_squared) → phoenix6.status_code.StatusCode¶

Sets the simulated rotor acceleration of the TalonFX. This is the acceleration of the rotor (before gear ratio) used for the RotorSensor feedback source.

Parameters:: rpss (rotations_per_second_squared) – The new acceleration in rotations per second²
Returns:: Status code
Return type:: StatusCode

phoenix6.sim.talon_fx_sim_state¶

Module Contents¶

`phoenix6.sim.talon_fx_sim_state`¶